10-425 Screw Neck 2ml HPLC Autosampler Vial

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

10mm sample vials are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. Aijiren’s 10mm large opening can effectively prevent the risk caused by the offset of the injection needle.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass; Requires the use of 10-425 screw thread closures and 10mm septa. Please see Assembled Caps and Septa. Limited Volume Inserts for Wide Opening 10-425 Vials.

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

Screw neck 2ml HPLC Autosampler Vial is designed for high performance liquid chromatography (HPLC) autosampler systems. It is characterized by ease of use and excellent compatibility and is often referred to as an autosampler vial. With an 8mm outer diameter and 425 thread style, it is available in clear and amber. They are made of borosilicate glass type I material, with a use volume of 1.5ml and a maximum capacity of 2ml

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) 1.5ml vials and 13-425 (13mm) 4ml vials.

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. Aijiren 10mm 2ml hplc auotsampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high cost performance of this material is the first choice for throughput analysis.

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

Item:2ml hplc vials and 4ml washing vials supplier
Color: Clear or Amber
Brand: Aijiren Tech
Capacity Recommend: 1.5ml Standard
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Aijiren 10mm hplc vial features: all glass is made of material with 5.0 light transmittance, which is perfectly compatible with the instrument. 10-425 wide-mouth vial is similar to 8-425 small-neck vial, mainly used for Waters autosamplers and Japanese instruments , And the wide mouth can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Aijiren 10mm hplc vial is generally made of high-quality imported 5.0 expanded borosilicate glass tube. The high cost performance of this material is the first choice for throughput analysis, and the 7.0 vial can also be customized. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

10-425 Screw Neck 2ml HPLC Autosampler Vial design is characterized by universal ease of use, especially the use of automated sample introduction systems. Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

• 32 X 12 mm, 2ml, screw neck
• The Mcirolab’s 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
• Packed in a Cleanroom class 100,000.
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.
• Clear glass vials–made from USP Type I, Class A, 33 Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51 Borosilicate Glass.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass; Requires the use of 10-425 screw thread closures and 10mm septa. Please see Assembled Caps and Septa. Limited Volume Inserts for Wide Opening 10-425 Vials.

Aijiren autosampler vials are suitable for HPLC, LC/MS, GC, and GC/MS instruments and applications.

10-425 Screw Neck 2ml HPLC Autosampler Vial design is characterized by universal ease of use, especially the use of automated sample introduction systems. Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Item:2ml hplc vials and 4ml washing vials supplier
Color: Clear or Amber
Brand: Aijiren Tech
Capacity Recommend: 1.5ml Standard
Payment: 100% T/T in advance
Certificate: ISO9001:2015

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren 10mm hplc vial: dimensions: 11.6mm x 32mm, mouth diameter: 10mm, 425 standard threads, 2ml capacity.
Features of the related parameters of the cover cushion: septum diameter 10mm, thickness 1.5mm; cover opening diameter 7mm; cover applicable diameter 10mm, GPI standard 425 thread.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Packing: 100pcs/pk
For Use With (Application): GC, HPLC
Usage: Laboratory Analysis
Logo: Customized Accepted

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. Aijiren 10mm 2ml hplc auotsampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high cost performance of this material is the first choice for throughput analysis.

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

10mm sample vials are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. Aijiren’s 10mm large opening can effectively prevent the risk caused by the offset of the injection needle.

Aijiren 10mm hplc vial is generally made of high-quality imported 5.0 expanded borosilicate glass tube. The high cost performance of this material is the first choice for throughput analysis, and the 7.0 vial can also be customized. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Micro vials are specially designed to collect micro-volume samples and minimize evaporation.
Two sizes are available
Tapered for high recovery of contents.
Work with Mininert sampling valves.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren 10mm hplc vial features: all glass is made of material with 5.0 light transmittance, which is perfectly compatible with the instrument. 10-425 wide-mouth vial is similar to 8-425 small-neck vial, mainly used for Waters autosamplers and Japanese instruments , And the wide mouth can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Screw neck 2ml HPLC Autosampler Vial is designed for high performance liquid chromatography (HPLC) autosampler systems. It is characterized by ease of use and excellent compatibility and is often referred to as an autosampler vial. With an 8mm outer diameter and 425 thread style, it is available in clear and amber. They are made of borosilicate glass type I material, with a use volume of 1.5ml and a maximum capacity of 2ml

Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro-inserts are manufactured of clear glass. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.
Micro inserts can be used with screw tops, crimp tops, or snap-top vials. All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed and uniform tip that enables better sample recovery. Micro-inserts can be used on all 1.5ml vials. Effectively relieves the pressure of the syringe. PolySpring inserts are self-aligning.

Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

Aijiren 10mm hplc vial is suitable for the following brands of instruments: Jasso, Shimadzu, Varian, VWR (Merck)/Hitachi, PerkinElmer, etc. 10mm is 40% larger than the opening of the general liquid/gas injection bottle, which is more conducive to multiple injections. The sample bottle with writing provides a graduated writing label for easy identification of the sample.

Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling
Vials are manufactured of Clear or Amber, borosilicate glass
Requires the use of 10-425 screw thread closures and 10mm septa.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Sample: Free
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

HPLC Vials 10-425 1.5ml Screw Vials. Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling. Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass . Requires the use of 10-425 screw thread closures and 10mm septa.

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) 1.5ml vials and 13-425 (13mm) 4ml vials.

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

• 32 X 12 mm, 2ml, screw neck
• The Mcirolab’s 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
• Packed in a Cleanroom class 100,000.
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.
• Clear glass vials–made from USP Type I, Class A, 33 Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51 Borosilicate Glass.

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert