4ml Vials Rack

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

These headspace vials are made of superior quality 1st hydrolytic class glass (Type 1) and have a thicker glass wall to withstand higher temperatures and internal pressures for the analysis of volatile gas in the vial’s headspace.
Finish: Crimp Top with Bevel Finish
Pack Size:100
Colour: Clear
Type: Vial
Closure: Crimp
Closure Size: 20mm
Vial Height: 75mm

The Aijiren GL45 500ml media bottle are designed and manufactured in China. Made of premium Borosilicate glass, these GL45 500ml media bottle offer maximum possible chemical resistance with minimal thermal expansion, making them the best choice for laboratory applications.

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

11mm Snap Top Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

When using COD test tubes, we usually inject the sample to be tested into the test tube and shake the tube vigorously to suspend all the sediment. Remove the cap of the COD test tube and add 2 mL of sample using a pipette.

Chemical Oxygen Demand (COD) test tubes are essential tools for water quality analysis, widely used in municipal, industrial, and environmental testing. These specialized tubes are designed to withstand high temperatures and harsh chemical conditions during the COD digestion process. Let’s dive into the key features and best practices for using COD test tubes.

This type of glass has a borosilicate structure. It is ideal for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap

These 2ml clear chromatography vials include 100/PK of 2ml RSA-Pro™ surface-treated glass vials with 9mm screw threads. Any requirement about 2ml clear chromatography vials,please contact AIJIREN.
Volume: 2ml
Usage: Laboratory Analysis
Brand Name: AIJIREN
Printing with Company Logo: Accept

2ml Clear Screw HPLC Vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

The Screw Top Vials produced by Aijiren are available in three different calibers, 8mm, 9mm and 10mm. The matching PP Screw Caps are made of high-quality polypropylene materials. If the number of samples to be tested is small, it can also be used with micro-insert. Bottles with different calibers have different matching micro-inserts.

ThisAmber 1000ml Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders that are light sensitive. When pouring hot liquids into an Amber 1000ml Reagent Bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool

4 mL, 15 x 45mm screw-top glass vials with fill marks are also appropriate for use as wash vials and waste vials in autosamplers. These vials can also be used in Perkin-Elmer Autosystem GC, Waters 48 position tray autosampler, Shimadzu AOC-14/1400, LC-10A, and the SIL-2AS. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. These vials can also be used as storage vials.

The default is 25 pcs/foam box. If you need 100 pcs/carton, please contact the product manager.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) 1.5ml vials and 13-425 (13mm) 4ml vials.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

Standard Autosampler Vial for HPLC & GC Chromatography, vials can be used for high-performance liquid chromatography and gas chromatography for reliable analysis results
Material: Glass
Color: Clear
Height (Metric): 32mm
Outside Diameter (Metric): 12mm
Patched: No
Residual Volume: <170uL Quantity: 100Pieces/Pack

Autoclavable: Max 120℃ for bottles
140℃ for caps when autoclaving
durable, reusable, environmentally friendly
Glass bottles are fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

The 1000ml reagent bottle produced by Aijiren is made of soda-lime glass, which is extremely inert and hard to react with reagents. The wide mouth design of the 1000ml reagent bottle provided by Aijiren is also very practical, which can easily pour reagents and add reagents. A 1000ml reagent bottle is a good tool for HPLC analysis.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Conical Bottom Inserts:

Designed to concentrate samples at the bottom, reduce residues and maximize recovery. Ideal for trace analysis where every drop counts.

Flat Bottom Inserts:

Easier to clean and reuse, but may leave some residual liquid. Suitable for general storage and processing tasks.

Conical base with polymer spring inserts:

They provide additional stability to prevent tilting or movement within the vial, making them suitable for automated high-throughput analysis.

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Pre-slit PTFE/Silicone Septa is designed for applications where larger sample volumes need to be injected from a vial to avoid aspiration. This septa allows ambient gas to balance the gas in the vial, reducing the vacuum created by a tight seal around the needle. The pre-slit design makes the septa easier to penetrate with a needle and releases the vacuum created when removing large samples from the vial, while maintaining chromatographic properties similar to un-slit septa.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Applications:
• HPLC aqueous sample preparation
• Biological sample preparation
• Buffer solutions
• Salt solutions
• Tissue culture media
• Irrigation solutions
• Sterile isolation
• Medical use, sterile filtering protein solution, tissue culture media, additives.

Aijiren autosampler vials are suitable for HPLC, LC/MS, GC, and GC/MS instruments and applications.

High recovery sample bottles are designed to utilize the sample in the bottle and reduce the loss of experimental samples. The built-in liquid reservoir design allows the sample to be drawn up by the injection needle even at low liquid levels, making it particularly suitable for the analysis of precious samples.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment. Syringe filters can be used in HPLC analysis and IC analysis to filter sample solutions, which is an important step in the sample pretreatment process.

The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle.
If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release of the vacuum that forms when a large volume of sample is withdrawn from a vial.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

EPA vials meet U.S. Environmental Protection Agency (EPA) requirements for testing water or soil samples for potentially harmful environmental contaminants.
If used for environmental analysis, EPA vials must be clean and free of substances that may affect the analysis. Glass vials that meet these requirements are called EPA vials, sometimes also called VOA (Volatile Organic Analysis) vials. EPA Vials are made of chemically inert Type I borosilicate glass in clear or amber colors.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

The vial has an 18mm outer diameter, which is a standard size for screw-cap headspace vials. It is designed to hold gas or liquid samples for analysis. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Aijiren’s 2ml 8mm Screw Top HPLC Vial uses borosilicate hydrochloric acid glass, which can withstand high temperature, is highly inert, and is not easy to react with chemical reagents. Customers can choose 5.0 type or 7.0 type glass according to their own experimental conditions, or they can choose to bring or not label area.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. 13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler. 4mL vials are widely used in compound storage as well as for chromatography sample vials. Aijiren 13-425 screw neck vial is generally made of high-quality Borosilicate Glass or 1st hydrolytic class glass. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, and suitable for most chromatographic applications and includes a write-in patch for sample identification. Available with graduated marking spots.

10ml glass test tube with plastic screw cap is used for water analysis and soil analysis; The size of glass test tube are 16x100mm, 16x125mm and 16x150mm. This test tube can be available Flat bottom and Round bottom. It can be used for digestion.

The 2ml HPLC vials with a writing area and ticking are effective solutions because sample information can be read quickly, improving efficiency and workflow security.The 2 ml glass vial is made of borosate glass and can withstand high temperatures and is not easy to react with samples.

This glass vial crimper tool headspace is made of Stainless steel, the handle of perfume bottle crimper and decapping is made of Carbon steel. this glass vial crimper tool is widely used in pharmaceutical industry, perfume industry, food, packaging, school and Laboratory. The glass vial crimper and decapping tool is compatible with crimp 20mm filp off cap and all aluminum caps

headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.
Cap Shape: Crimp-top
Size: 22.5*75mm
Color: Amber and Color
MOQ: 2 Packs
Payment: 100% T/T in advance

Aijiren 4ml 13-425 Screw Thread Vial is a high-quality, chemically resistant glass vial designed for HPLC and GC applications, featuring a 13-425 standard screw thread for secure sealing and compatibility with various autosamplers.

ND24 TOC Screw Neck Vials(Clear/Amber).Available with black or white screw caps with 24mm thread
Disposable: Disposable
Certification: CE, ISO
Material: Glass
Bottle Top: Screw Neck
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark: Aijiren

The syringe filter produced by Aijiren is often used to filter impurities in the reagents to be tested. After the impurities are filtered, the reagents can be sucked into the autosampler. If the syringe filter is not used, it may cause problems such as clogging the needle hole with impurities in the reagent.

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

15x45mm 4mL vials are widely used in compound storage as well as for chromatography sample vials.4mL vials are compatible with 13-425 screw thread closures，is for cleaning the needles during automatic sampling.13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler.4mL vials are widely used in compound storage as well as for chromatography sample vials.

Clear glass vials with a 20mm crimp seal finish are designed to fit most headspace autosamplers.
Capacity (mL): 20
Diameter (mm): 23
Height (mm): 75
Quantity: 100
Base Style: Flat Bottom
Finish: Beveled Edge
Color: Clear

Items: HPLC Septa
Material: PTFE/Silicone
Application: For HPLC Analysis
Sample: Free
Usage: Laboratory Analysis
OEM: Available
Certification: ISO9001:2022
Place of Origin: China (Mainland)

These 2ml clear chromatography vials include 100/PK of 2ml RSA-Pro™ surface-treated glass vials with 9mm screw threads. Any requirement about 2ml clear chromatography vials,please contact AIJIREN.
Volume: 2ml
Usage: Laboratory Analysis
Brand Name: AIJIREN
Printing with Company Logo: Accept

Capacity: 100ml
Package Dimensions: ‎16.89 x 7.52 x 7.01 inches
Shape: Round
Manufacturer: Aijiren
Max temperature of 140 degrees Celsius (284 degrees Fahrenheit)

Standard vials for GC and HPLC
40% larger opening than standard narrow opening vials enables easy filling and improves auto-sampler needle accuracy.
Provides the tightest seal.
Precision-formed neck for improved autosampler handling
Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Aijiren 0.45μm Syringe Filter provides fast and efficient filtration solutions for aqueous and organic solutions, protecting columns in HPLC IC analysis from clogging by particulate impurities and ensuring instrument safety.

Hazardous material: No
Type of crimper: Manual, standard
Nominal diameter: N 20
Cap type: Crimp cap (aluminum), Crimp cap (magnetic), Crimp cap (magnetic bi-metal)
Recommended application(s): For crimping of 20 mm crimp caps
Storage temperature: RT
Scope of delivery: 1 x crimping tool N 20

This Clear Reagent Bottle is made from BOROSILICATE 3.3 glass, making it heat and chemical resistant. Aijiren is the leading supplier of Clear Reagent Bottle since 2007, is a reliable supplier of lab consumables.

The 2mL glass screw top autosampler vial has a variety of neckwear and opening diameters to choose from. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The large opening reduces the risk of the autosampler needle bending during sampling.

Aijiren 10mL certified screw and crimp style, clear or amber glass headspace vials. These 10ml Headspace GC Vials come in both flat- and round bottom styles for use in a wide variety of headspace instrument platforms.

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

Item: 250ul HPLC Vial Insert
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

The 2ml 10mm clear HPLC vials can be suitably employed to inject samples from an autosampler. They come in a variety of sizes, 2ml 10mm clear HPLC vials being ubiquitously used.
Vial Volume: 1.5-2.0ml
Clear: Amber and Clear
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Bonded cap and septa are designed specifically for HPLC autosamplers and have excellent resealing properties and chemical resistance, ensuring sample integrity and accuracy during storage and analysis. These cap and septa are made of a composite of PTFE and silicone, providing a high degree of chemical inertness and are suitable for a variety of solvents and chemical environments.

Individually packaged, 100pcs per pack, 40PK/carton.56*50*26cm.

✅Uniform Pore Size – PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency. 13mm disc diameter, 0.22μm, pore size, 100 pcs barreled packed.
✅ High-Quality – ISO 9001 certificated, ensuring the quality of the filter from the first inspection, mind-control inspection, patrol inspection, and warehouse inspection.
✅Non-Sterile Syringe Filters – PTFE syringe filters housing is made of premium polypropylene(PP) material with a unique threaded interface (Luer lock) design, non-sterile, no adhesive, and no contamination of the sample. It can be autoclaved and sterilized at 121°C/249.8℉ for 30 minutes.
Sample: Free
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Material: Borosilicate Glass
Using for storage as well as mixing and sampling
GL45 threaded cap with a drip-free pouring ring
Max temperature of 140 degrees Celsius (284 degrees Fahrenheit)
borosilicate glass content: B2O3 about 12%-13% ; SiO2 over 80%
1. good thermal resistance
2. excellent chemical durability
3. high light transmission

The gasket produced by our company has the following characteristics: the gasket is non-toxic; it adopts a non-adhesive bonding process to bond the PTFE membrane and silicon rubber or silica gel together. Chemically inert, resistant to acid, alkali, temperature, and adhesion. At the same time, the elasticity of the silicone rubber or silica gel layer can be used to ensure the sealing performance.

Aijiren’s 2ml Snap Vial is made of PP material to make Cap, and Glass material is made of Vial. Vial can choose whether to have a label area. The snap cap only needs a manual bayonet. When you hear a “click”, it will be closed. Because the snap cap is not tight, it is not recommended to contain liquid reagents.

Aijiren 10ml and 20ml amber screw gas chromatography vials, clear or amber glass headspace vials, and associated 11 mm, 18 mm, and 20 mm headspace caps are engineered to prevent sample contamination while providing consistent, secure seals.

Our 2ml Amber HPLC Screw Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass. By choosing our 2ml Amber HPLC Screw Vials with Caps, you provide your sample with the best containment solution available.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.
The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.
Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which ensures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed the OEM instrument manufacturer’s specifications. Aijiren Tech vials are available in 6ml, 10ml, and 20ml versions with Screw and Crimp types.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

ThisAmber 1000ml Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders that are light sensitive. When pouring hot liquids into an Amber 1000ml Reagent Bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool

These standard opening 2ml HPLC Vials with Caps have a narrow opening that can be used with a 9-425mm cap and a septum.So if you are interested in 2ml 9mm HPLC Vial, please contact us right NOW.

Membrane filter is one of the commonly used consumables in laboratories. Common microporous membrane
filter include NY, PTFE, PVDF, MCE, CA and so on.
Please choose a reasonable filter membrane according to your needs.

Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

The headspace vials produced by Aijiren are often used in gas chromatography. The 10ml headspace vials are divided into two colors: clear glass and amber glass. The top of the 18mm Screw Top ensures the tightness of the headspace bottle and is easy to operate.

Available in sterile and non-sterile options