8mm HPLC Vials for Sale

Glass Vials Lab 8-425 neck finish represents a hplc vials &gc vials the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm Autosampler Hplc Vials &gc vials are available in a variety of neck finishes and opening diameters.

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Micro vials are specially designed to collect micro-volume samples and minimize evaporation.
Two sizes are available
Tapered for high recovery of contents.
Work with Mininert sampling valves.

Conical Inserts from Aijiren are designed to assist in the consistent sampling of low-volume chromatography samples. Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. The 150 μL Conical Bottom Vial Inserts are made of clear glass and suits for 8-425 vials. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial. Analysts can use insert vials to achieve greater control over sample introduction, reduce contamination risk, improve data quality overall, ensure consistent injection volumes with increased peak shapes, optimize separation efficiency, and enhance chromatographic performance.

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear or Amber borosilicate glass. Available with a standard graduated write-on patch for easy filling and identification of samples. Requires the use of 8-425 closures and 8mm septa.2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Strictly quality control to ensure the consistent size of each lot of 8mm Screw Vials. 

Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals.

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren autosampler vials are suitable for HPLC, LC/MS, GC, and GC/MS instruments and applications.

They are standard vials for GC/HPLC and designed to work in a variety of Autosamplers requiring narrow neck vials. The vials are preferentially used on instruments of the following manufacturers: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR (Merck®)/Hitachi, etc.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Packing: 100pcs/pk
For Use With (Application): GC, HPLC
Usage: Laboratory Analysis
Logo: Customized Accepted

2mL Standard Opening Vials. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, 5.5 mm opening. The thread size on this vial is 8-425. Choice of clear or amber glass. These vials are the very best available today for HPLC, GC, LCMS & GCMS

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

zhejiang Aijiren Tech. is professional supplier of 8mm thread hplc vials, autosampler vials 1.5ml / 2ml, 8-425 trhread vial is the original screw thread vials, dimension: 12*32mm, meterial: borosilicate glass, clear or amber.

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

Aijiren screw thread top 8-425 sample vials design is characterized by the use of automated sample introduction systems, also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. Standard vials are widely used for GC and HPLC.

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.

2mL Standard Opening Vials. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, 5.5 mm opening. The thread size on this vial is 8-425. Choice of clear or amber glass. These vials are the very best available today for HPLC, GC, LCMS & GCMS

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Packing: 100pcs/pk
For Use With (Application): GC, HPLC
Usage: Laboratory Analysis
Logo: Customized Accepted

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

 1.5mL Clear Screw Neck vial,8-425 Thread,11.6*32mm application in liquid chromatography, Gas chromatography, and Mass spectrometry. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

Aijiren screw thread top 8-425 sample vials design is characterized by the use of automated sample introduction systems, also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. Standard vials are widely used for GC and HPLC.

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

8-425 Screw Cap  are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals.

8-425 screw top, 2ml Amber vial, graduated with writing area, standard opening vial
Caps are black screw PP cap,with 5.5mm centre Hole
Septum is made of High quality PTFE/silicone to ensure proper functioning

Conical Inserts from Aijiren are designed to assist in the consistent sampling of low-volume chromatography samples. Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. The 150 μL Conical Bottom Vial Inserts are made of clear glass and suits for 8-425 vials. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial. Analysts can use insert vials to achieve greater control over sample introduction, reduce contamination risk, improve data quality overall, ensure consistent injection volumes with increased peak shapes, optimize separation efficiency, and enhance chromatographic performance.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Sample: Free
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren autosampler vials are suitable for HPLC, LC/MS, GC, and GC/MS instruments and applications.

They are standard vials for GC/HPLC and designed to work in a variety of Autosamplers requiring narrow neck vials. The vials are preferentially used on instruments of the following manufacturers: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR (Merck®)/Hitachi, etc.

250µL Flat Bottom Glass Inserts for Chromatography Vials. These Flat Bottom Glass Inserts are designed to be used in 2mL standard opening crimp top and screw thread vials. They represent an economical alternative to the conical limited-volume inserts. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. The 250µL Glass Flat Bottom Inserts make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must-have for your research.

Glass Vials Lab 8-425 neck finish represents a hplc vials &gc vials the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm Autosampler Hplc Vials &gc vials are available in a variety of neck finishes and opening diameters.

Micro inserts Packing: Economy Package and General Package for choose. Neutral carton outside, pallet is available to protect quality better.
OEM packing is also available.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

8-425 screw-thread vials are the original, standard opening vials，Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample, Require the use of 8-425 closures and 8mm septa.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear or Amber borosilicate glass. Available with a standard graduated write-on patch for easy filling and identification of samples. Requires the use of 8-425 closures and 8mm septa.2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Strictly quality control to ensure the consistent size of each lot of 8mm Screw Vials. 

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

zhejiang Aijiren Tech. is professional supplier of 8mm thread hplc vials, autosampler vials 1.5ml / 2ml, 8-425 trhread vial is the original screw thread vials, dimension: 12*32mm, meterial: borosilicate glass, clear or amber.

8mm Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler.
Suitable for Agilent, AB Sciex, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers.
Amber vial, 51 Expansion borosilicate glass USP Type I, Class B
Polypropylene Screw Cap with Septa

The 8-425 amber sample bottle with a specification of 2 ml and 12 x 32 mm uses first-grade hydrolyzed glass as the raw material. The standard sample bottle for GC and HPLC has a small diameter and 8-425 standard threaded mouth. Sample storage. It can be used with 8-425 screw cap septum. The novel small opening sample bottle is equipped with a threaded cap of 8-425 thread size. There are black and white two-color opening caps, solid caps and various septa suitable for different applications.

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Micro vials are specially designed to collect micro-volume samples and minimize evaporation.
Two sizes are available
Tapered for high recovery of contents.
Work with Mininert sampling valves.

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

The opening of the 8mm hplc vial is 5.5 mm. These vials are designed for most autosamplers that use 12mm x 32mm crimp vials. They provide the convenience of threaded vials for instruments that were originally designed to crimp top vials. They are available in clear glass and amber glass8-425 screw top 2ml vials

In chromatography analysis field, 8mm short screw vials is widely used in Life science and technology, Environmental Protection, Food safety. 2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm.