Aijiren Chromatography Consumables for HPLC and GC

Aijiren supply 1000ml Amber Glass Reagent Bottle and clear Glass Reagent Bottle. All of the reagent bottles are glass material. Aijiren is the leading supplier of 1000ml Amber Glass Reagent Bottle since 2007, is a reliable supplier of lab consumables.

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

Aijiren COD test tubes are made of borosilicate glass, which reduces pH changes and possible leaching of contaminants from soda-lime glass. The septa uses a PTFE silicone rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. The COD test tube is small in size, light in weight, and cannot be reused.

GL45 Screw Cap: Blue GL45 screw cap, tight seal, drip-free pouring ring, airtight seal, no leaking
Screw Cap: GL45 Blue Polypropylene
Material: Borosilicate Glass
Using for storage as well as mixing and sampling
These heavy-duty borosilicate glass round bottles
linerless
one-piece autoclavable blue polypropylene plug seal
GL45 threaded cap with a drip-free pouring ring

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

32*12 mm, 2ml, screw neck, It is dimensionally equivalent to 11mm crimp top vials and 10-425 screw vials. The 9mm screw vials can be used in any autosampler which used 11mm crimp top vials and 10-425 screw vials. Compared to 11mm crimp top type, the 9mm screw one can be much applied as hand removing convenient.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.
High quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base insert vial can saving samples while during injection. wide opening top for better needle injection. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volum. Bottom fixed micro insert to keep the vial central vertical

The 1000ml reagent bottle produced by Aijiren is made of soda-lime glass, which is extremely inert and hard to react with reagents. The wide mouth design of the 1000ml reagent bottle provided by Aijiren is also very practical, which can easily pour reagents and add reagents. A 1000ml reagent bottle is a good tool for HPLC analysis.

4 mL, 15 x 45mm screw-top glass vials with fill marks are also appropriate for use as wash vials and waste vials in autosamplers. These vials can also be used in Perkin-Elmer Autosystem GC, Waters 48 position tray autosampler, Shimadzu AOC-14/1400, LC-10A, and the SIL-2AS. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. These vials can also be used as storage vials.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Item: Aluminum Cap with PTFE septa
Screw Thread Type
Application: For 18mm Headspace Vials
Brand: Aijiren
Certification: ISO9001:2022
Place of Origin: China (Mainland)
Sample: Free
Payment: 100% T/T in advance

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

The 2ml sample vials of screw lid 2ml clear vials is made of type 1 boronate glass with a low metal content to prevent sample degradation and leakage. They are sold in several sizes, but wide opening 2ml clear vials are more commonly used.

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw.

Aijiren Technology,Inc. is a large-scale high-tech company specializing in the production of sample vials and closures. Relying on good science and technology and a large number of high-tech talents, sample vials and closures produced by Aijiren Technology,Inc. We through out the ISO9001:2015 quality certification, It is worth mentioning that it was audit and issued by the most stringent SGS in the industry.

Clear glass vials with a 20mm crimp seal finish are designed to fit most headspace autosamplers.
Capacity (mL): 20
Diameter (mm): 23
Height (mm): 75
Quantity: 100
Base Style: Flat Bottom
Finish: Beveled Edge
Color: Clear

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.
High quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base insert vial can saving samples while during injection. wide opening top for better needle injection. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volum. Bottom fixed micro insert to keep the vial central vertical

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Screw Cap: GL45 Blue Polypropylene
Material: Borosilicate Glass
Using for storage as well as mixing and sampling
GL45 threaded cap with a drip-free pouring ring

Syringe filters can be used in HPLC analysis and IC analysis to filter sample solutions, which is an important step in the sample pretreatment process.

The 500ml Reagent Bottle produced by Aijiren is often used in HPLC chromatographic analysis. The 500ml reagent bottle is often used to hold reagents in chromatographic analysis. The liquid level of the reagent in the bottle can also be clearly seen through the transparent glass to facilitate Laboratory personnel add liquid in time

Autosampler vial can be divided into HPLC vial and GC vial. So Autosampler vial has different volume. Especially, some sample is rare. so the micro-insert is needed. No matter which autosampler vial you need, you should confirm the chromatography instrument, firstly. You can find your needed in Aijiren and you can also tell us your requirement, our technical engineer will give anwser.

These headspace vials are made of superior quality 1st hydrolytic class glass (Type 1) and have a thicker glass wall to withstand higher temperatures and internal pressures for the analysis of volatile gas in the vial’s headspace.
Finish: Crimp Top with Bevel Finish
Pack Size:100
Colour: Clear
Type: Vial
Closure: Crimp
Closure Size: 20mm
Vial Height: 75mm

The Aijiren GL45 500ml media bottle are designed and manufactured in China. Made of premium Borosilicate glass, these GL45 500ml media bottle offer maximum possible chemical resistance with minimal thermal expansion, making them the best choice for laboratory applications.

The size of Snap Vial is 2 mL, 12 x 32 mm, 11mm amber wide-mouth bayonet glass sample bottle using first-grade hydrolyzed glass as raw material. Standard sample bottles for GC and HPLC can be used for autosampler and sample storage.

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

The COD Test Tube produced by Aijiren is often used for chemical oxygen demand (COD) testing, and COD testing uses a specific oxidant to oxidize the substances (including organics) in the water sample. As the temperature and time decrease, the test requires This method is often widely used as a measure of organic pollutants.

Aijiren test tubes with rims are made from borosilicate glass 3.3 making them excellent for general laboratory use.
Pack size: Pack of 100
Size: 16x125mm
Tube Diameter:16mm
Tube Length:125mm
Wall Thickness :1.2mm

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass.

The headspace vials produced by Aijiren are often used in gas chromatography. The 10ml headspace vials are divided into two colors: clear glass and amber glass. The top of the 18mm Screw Top ensures the tightness of the headspace bottle and is easy to operate.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

The default is 25 pcs/foam box. If you need 100 pcs/carton, please contact the product manager.

The vial for HPLC with insert is larger than the 9mm screw sample vial and has a wider mouth.2ml autosampler vials is a container designed to temporarily hold samples analyzed as part of gas (GC) or liquid (HPLC) chromatography.

The crimp cover of the jaws is made of aluminum for crimping and sealing. Suitable for 20mm Crimp Top Headspace Vials.

4 mL, 15 x 45mm screw-top glass vials with fill marks are also appropriate for use as wash vials and waste vials in autosamplers. These vials can also be used in Perkin-Elmer Autosystem GC, Waters 48 position tray autosampler, Shimadzu AOC-14/1400, LC-10A, and the SIL-2AS. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. These vials can also be used as storage vials.

Clear 20 mL gas chromatography vials with 20 mm crimp seals, designed to fit most headspace autosamplers. Designed to use separating organic and inorganic compounds for analysis, chromatography vials come in different finishes to guarantee chemical compatibility.

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Multi-process mold extensions for inclusion of single or multi-level prefiltration media.
Digital variable print capabilities along an arc on barrel face for identification purposes.
Blister packing for EO and gamma sterilization.
Pure virgin PP, verified by HPLC against U/L extractable.
Payment: 100% T/T in advance
Certificate: ISO9001:2015
Brand Name: Aijiren

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

11mm crimp top vials are designed to provide superior performance in limited volume applications where recovery of the vial contents is the main consideration. These vials are designed to be used with 11mm aluminum crimp top seals.

headspace vials come in two basic sizes :10 mL glass vials and 20 mL glass vials; Crimp caps are most common however many customers use screw sample and application dependent; clear glass vials and amber vials are available

Aijiren 10mm hplc vial: dimensions: 11.6mm x 32mm, mouth diameter: 10mm, 425 standard threads, 2ml capacity.
Features of the related parameters of the cover cushion: septum diameter 10mm, thickness 1.5mm; cover opening diameter 7mm; cover applicable diameter 10mm, GPI standard 425 thread.

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

Glass Vials Lab 8-425 neck finish represents a hplc vials &gc vials the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm Autosampler Hplc Vials &gc vials are available in a variety of neck finishes and opening diameters.

For some applications Polypropylene HPLC Vials are not suitable due to their composition and their chemical properties. Amongst these are heavy metal analysis, water and protein analysis, atomic absorption, capillary electrophoresis (CE) and ion chromatography (IC). For all these cases high purity polypropylene vials with 0.3 mL, 0.7 mL and 1.5 ml in transparent and amber are available.

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw.

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

All Aijiren reagent bottles have permanent, white enamel graduations for volume measurement and a white identification box for marking or coding. All Aijiren media bottles include a drip-free sealing ring as well as a standard blue polypropylene (GL45) sealing cap.

Item: Micro Insert for 9mm Autosampler Vial
Volume: 0.15-0.3ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Packing: 100pcs/pk
Brand Name: Aijiren
Place of Origin: China (Mainland)
Compatibility: 9mm HPLC Vials

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren offers pre-cleaned 40 ml glass vials certified for Total Organic Carbon (TOC vials).  We offer TOC vials certified to contain less than 10 Parts Per Billion (PPB) and less than 20 Parts Per Billion (PPB) for use in pharmaceutical and biotechnology applications. Sample storage vials, also known as chemical glass storage bottles, or sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils, and other products, suitable for long-term storage and transportation of products, Has excellent sealing performance. 

Autoclavable: Max 120℃ for bottles
140℃ for caps when autoclaving
Available Volume :50ml to 2000ml
Feature: durable, reusable, environmentally friendly
Using: Glass bottles fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Storage vials also named sample vials, used in the package of biological agent, cosmetics, high value chemistry and so on.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.
Aijiren offers many standard vials and vial kits for volatiles sampling, compound storage and other non-chromatography applications.

GC (gas chromatography) and GC-MS (gas chromatography-mass spectrometry) are two analytical techniques commonly used to separate and identify volatile compounds.

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

2ML Autosampler Vials are ubiquitous in analytical laboratories and vendors have developed many varieties to meet the various needs of scientists.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

Conical glass inserts have a tapered bottom with pulled tips and are available with or without plastics polypropylene springs. The spring acts as a shock absorber during needle penetration and raises the insert above the bottom of the vial, allowing greater sample recovery.

250µL Flat Bottom Glass Inserts for Chromatography Vials. These Flat Bottom Glass Inserts are designed to be used in 2mL standard opening crimp top and screw thread vials. They represent an economical alternative to the conical limited-volume inserts. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. The 250µL Glass Flat Bottom Inserts make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must-have for your research.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling and also can be used for GC and HPLC. 4mL 13-425 Screw Thread Autosampler Vials are widely used in compound storage as well as for chromatography sample vials. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Available as closed or open top screw seals with 13-425 thread. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

Volume: 1.5-2.0ml
Dimension: 12x32mm
Color: Amber and Clear
Neck: Screw neck
Neck Diameter: 9mm
Material: Brosilicate Glass/1st hydrolytic class glass
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Insert: 250ul/300ul

The 9mm HPLC Autosampler Vial is the most widely used. Support OEM customization, customized logo, customized packaging

The 2mL glass screw top autosampler vial has a variety of neckwear and opening diameters to choose from. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The large opening reduces the risk of the autosampler needle bending during sampling.

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

This Amber Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders that are light sensitive. When pouring hot liquids into an Amber Reagent Bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool.

Items: HPLC Septa
Material: PTFE/Silicone
Application: For HPLC Analysis
Sample: Free
Usage: Laboratory Analysis
OEM: Available
Certification: ISO9001:2022
Place of Origin: China (Mainland)

8mm Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler.
Suitable for Agilent, AB Sciex, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers.
Amber vial, 51 Expansion borosilicate glass USP Type I, Class B
Polypropylene Screw Cap with Septa

Disposable: Disposable
Certification: CE, ISO
Material: Alum
Bottle Top: Crimp Neck
Transport Package: Pack
Usage: 20ml Crimp Top Headspace Vials

The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish.Our 2ml Screw HPLC Vials are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

Product Size: Pack of 100
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Different Membrane syringe filter are available in Aijiren shop, The diameter of syringe filter are 13mm, 25mm, and 30mm. If you need other parameters syringe filter, you can ask our business manager. As we all know, the syringe filter is mainly used for prepare sample in chromatography system.

Capacity: 250 mL/8.5 oz
permanent white enamel graduations from 50 mL to 1000 mL
accurate scales, easy labeling
Dimension: OD: 2.56″, Neck ID: 1.18″, Height: 5.5″
Cap: GL45 Screw Cap
Cap: Blue GL45 screw cap

The 11mm crimp top chromatography vials is generally broken down into low boron and chromium, but the difference is that the content of boric acid and the physical and chemical properties of the glass are also different. Aijiren offers 11mm crimp top chromatography vials in the boric acid glass.

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

Aijiren’s 2ml 8mm Screw Top HPLC Vial uses borosilicate hydrochloric acid glass, which can withstand high temperature, is highly inert, and is not easy to react with chemical reagents. Customers can choose 5.0 type or 7.0 type glass according to their own experimental conditions, or they can choose to bring or not label area.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Material: Borosilicate Glass
Using for storage as well as mixing and sampling
GL45 threaded cap with a drip-free pouring ring
Max temperature of 140 degrees Celsius (284 degrees Fahrenheit)
borosilicate glass content: B2O3 about 12%-13% ; SiO2 over 80%
1. good thermal resistance
2. excellent chemical durability
3. high light transmission

Aijiren 9mm vials may be used with robotic autosamplers in place of crimp style vials. 9mm Vials have a 40% larger opening for easier sample preparation, Aijiren 9mm vials must be used with 9mm screw pp closures to ensure proper fit and functionality.

COD Reagent Vials found in: COD Tube Tests, COD Tube TestsOD Tube Tests, Digital Block 3 Heater, Multi-Range COD Reagent Systems, ECO 6 Thermoreactors for COD.So any requirements about COD Reagent Vials, please contact Aijiren.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

13mm diameter syringe filter:
Filter Ø: 13 mm
Filtration Area: 1.09 mm2
Housing material: polypropylene
Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on the membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane)

Magnetic Screw caps for CTC are novelties in the crimped neck-dominated Headspace market. However, especially for the hard-to-crimp magnetic caps, screw closures are a convenient alternative. It is constructed from metal, which ensures durability, strength, and resistance to environmental factors, making it suitable for long-lasting applications. The cap is equipped with a magnetic feature. This is extremely useful in precision work where screws need to be secured and placed accurately.