China Chromatography Vials for Supply

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

Product Size: Pack of 100
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

11mm Snap Top Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

Our 2ml Amber HPLC Screw Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass. By choosing our 2ml Amber HPLC Screw Vials with Caps, you provide your sample with the best containment solution available.

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The gasket is made of a PTFE silicon rubber gasket, which has strong sealing performance and can resist various chemical corrosion. The  COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate.

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

The 2ml chromatography vial is forged at high temperatures from borosilicate glass. The Aijiren Scientific 2ml chromatography vial Certified Vial Convenience Kit (Opening 9mm) is fully lot tested in multiple ways for 15 critical parameters.

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.

Micro vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren’s handheld crimping machine provides a consistent and reliable seal, ensuring that the vial is securely sealed every time. The high-quality structure has been carefully designed, has durability and long life, and can provide smooth and simple operation. Manually adjustable stop, comfortable to hold the cushion, economical and durable. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. Hand-operated with an adjustable stop,  There is a jaw pressure regulator on the operating handle and a cushion grip for user comfort. Specially designed for use in the laboratory with the good chemical resistance of the surface coating, Hand Crimper is widely used in laboratory Headspace vials crimping caps. The vial crimper is ideal for low-volume crimping operations and sample preparation operations.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension. This tension in the cap to return to its original size is the force forming the seal between glass, cap and septum. The advantage of a plastic snap cap is no tools are required to assemble. The snap-top cap is a compromise sealing system.

2ml Amber Screw HPLC Vials are a better choice used for most HPLC and LC-MS applications.2ml Amber Screw HPLC Vials can be made from a different coefficient of expansion glass; most notable 33-expansion and 51-expansion glass.

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren’s exclusive adhesive-free bonding process does not require the introduction of adhesives. The septum retains the excellent resilience properties of silicone rubber or silicone. It is softer than the septum of the bonding process and is convenient for the needle of the autosampler Better penetration.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. The manual crimper is suitable for standard laboratory bottles and seals with aluminum caps. Compared with the metal handle design, the ergonomic arc-shaped handle provides higher hand comfort during use. The bottom handle can be held steadily, without the need for “extra” squeezing. The easy-to-see adjustment knob is located on the head of the crimping pliers, so you can easily determine when the desired crimp setting is reached.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear or Amber borosilicate glass. Available with a standard graduated write-on patch for easy filling and identification of samples. Requires the use of 8-425 closures and 8mm septa.2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Strictly quality control to ensure the consistent size of each lot of 8mm Screw Vials. 

The crimp cover of the jaws is made of aluminum for crimping and sealing. Suitable for 20mm Crimp Top Headspace Vials.

Aluminum crimp seals with pre-fitted septa crimp top and snap cap vials. Crimp top vials provide an excellent seal for long-term sample storage and analyses involving high volatile solvents.

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

EPA vials are those that meet the requirements of the US Environmental Protection Agency (EPA) for the testing of potentially harmful environmental contaminants in water or soil samples.

Our 2ml Amber HPLC Screw Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass. By choosing our 2ml Amber HPLC Screw Vials with Caps, you provide your sample with the best containment solution available.

Aijiren 2ml amber HPLC vials with blue caps are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
Product Name: 2ml Amber HPLC Vials with Blue Caps
Place of Origin: Zhejiang, China
Packing: 100pcs/pack
Color: Amber or Clear
Size: 12*32mm

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

These 20mm Crimp Top Aluminum Caps are typically made of aluminum, which is a lightweight and corrosion-resistant metal. Aluminum provides excellent sealing properties, ensuring the integrity of the sample within the vial. The cap features a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. 20mm Crimp Top Aluminum Caps often come in various colors, which can help with sample identification, organization, or differentiation of different products or solutions. The cap material is a metal aluminum cover. The design with a 9.5mm hole in the center of the cover can be used for headspace analysis. Standard GC and HPLC sample bottles can be used for autosampler and sample storage.

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

The 20mm 20ml Crimp Top Headspace vial has a 20mm outer diameter, which is the standard size for crimp-style headspace vials. The 20ml capacity refers to the volume of the vial, meaning it can hold up to 20 milliliters of liquid or gas sample. These vials are typically made from high-quality borosilicate glass. Borosilicate glass is chosen because it is resistant to chemical reactions and can withstand high temperatures, making it ideal for containing volatile samples without contamination. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

All 2ml HPLC Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren as a leading manufacturer in China, supplies high-quality chromatography consumables such as 2ml HPLC Vials with Cap and syringe filters.

Pre-slit PTFE/Silicone Septa is designed for applications where larger sample volumes need to be injected from a vial to avoid aspiration. This septa allows ambient gas to balance the gas in the vial, reducing the vacuum created by a tight seal around the needle. The pre-slit design makes the septa easier to penetrate with a needle and releases the vacuum created when removing large samples from the vial, while maintaining chromatographic properties similar to un-slit septa.

Autoclavable: Max 120℃ for bottles
140℃ for caps when autoclaving
Available Volume :50ml to 2000ml
Feature: durable, reusable, environmentally friendly
Using: Glass bottles fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab

The 9mm screw vials are made of transparent Type 1 Class A or amber Type 1 Class B borosate glass. The 9mm screw vials are forged at high temperatures from borosilicate glass.

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.

Aijiren 15-425 threaded caps with silicone septa are designed for HPLC autosampler bottles to ensure the stability and integrity of samples during storage and injection. These caps are made of polypropylene (PP) material, which has excellent chemical stability and sealing performance and is suitable for a variety of laboratory environments.

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren Screw Caps with Septa for 8-425 Screw Neck Vial is a screw cap designed for 8-425 screw neck vials with PTFE or silicone septums for high performance liquid chromatography (HPLC) and gas chromatography (GC) sample vials. These caps ensure a good seal and chemical compatibility, while offering a wide selection of sizes and materials to meet different laboratory needs and autosampler compatibility requirements.

18mm screw neck metal screw cap is made of magnetic metal, this cap is mainly used for seal 18mm screw GC headspace vial. PTFE septa can meet multiple punctures.
Steel Magnetic caps tolerate high temperatures and are suitable for use with the CTC/LEAP/Gerstel autosamplers.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

These septa are designed to work on most HPLC screw vials. Screw HPLC Vials offer the convenience of screw thread vials for vials that were originally designed for screw-top vials. They are available in both clear and amber glass.

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

There are glass vials and plastic vials to choose from, and different materials can be selected for different scenes.

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

The 2ml HPLC Screw Vials are made from clear/ amber, Type I borosilicate and 33 expansion glass.2ml Amber HPLC Screw Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Reduce the chances of bent or broken needles during sampling.

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Bonded cap and septa are designed specifically for HPLC autosamplers and have excellent resealing properties and chemical resistance, ensuring sample integrity and accuracy during storage and analysis. These cap and septa are made of a composite of PTFE and silicone, providing a high degree of chemical inertness and are suitable for a variety of solvents and chemical environments.

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The SEPTA is made of PTFE silicon rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. Used for municipal wastewater testing; industrial wastewater and process control testing; and environmental water testing. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. The contents of the pipe should be disposed of in accordance with the requirements of local authorities.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Product Size: Pack of 100
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

The cap material is a metal aluminum cover.Standard GC and HPLC sample bottles can be used for autosampler and sample storage. There are two designs round bottom and flat bottom.The crimp cover of the vials is made of aluminum for crimping and sealing; plastic (polyethylene, polypropylene, or phenolic resin) for non-crimping and sealing.

These glass vials are used in the environmental industry. Available in Flat bottom.
Clear. Type 1, Borosilicate, 33 Expansion. Also available in Amber, 51 Expansion.
Various sizes and capacities are available. Caps are sold separately.
(24-414 finish available by special order).

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass.  The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius.  It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The COD Test Tube is small in size and light in weight. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. 

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

There are some lab autosampler vial, these glass autosampler vials are hot sale in recently. 4ml screw autosampler vial, 9mm screw glass sample vial and ND11 crimp HPLC vial are also seen in chromatography laboratory. Most important, All of autosampler vial can be supplied in wholesale price. 1.5ml–4ml autosampler vial for chromatography analysis are in stock. welcome to inquiry.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass