China Wholesale Clear and Amber Hplc vials

The opening of the 8mm hplc vial is 5.5 mm. These vials are designed for most autosamplers that use 12mm x 32mm crimp vials. They provide the convenience of threaded vials for instruments that were originally designed to crimp top vials. They are available in clear glass and amber glass8-425 screw top 2ml vials

The vial for HPLC with insert is larger than the 9mm screw sample vial and has a wider mouth.2ml autosampler vials is a container designed to temporarily hold samples analyzed as part of gas (GC) or liquid (HPLC) chromatography.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Item: HPLC Vials Insert
Volume: 0.15-0.3ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling
13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler
4mL vials are widely used in compound storage as well as for chromatography sample vials

Flat bottom glass inserts have the largest capacity and are the most economical inserts. These inserts are cylindrical in shape with a flat bottom.Aijiren is the leading supplier of Flat bottom glass inserts since 2007.

Aijiren 10mm hplc vial features: all glass is made of material with 5.0 light transmittance, which is perfectly compatible with the instrument. 10-425 wide-mouth vial is similar to 8-425 small-neck vial, mainly used for Waters autosamplers and Japanese instruments , And the wide mouth can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

11mm crimp top chromatography vial for sale is made of type I or borosilicate glass. This chromatography vial is better seal than screw top vial and snap top vial. Aijiren produce all the chromatography vials and septa in Class 100000 Cleanroom.
The 11mm crimp top autosampler vial 2ml is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use.At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

32*12 mm, 2ml, screw neck, It is dimensionally equivalent to 11mm crimp top vials and 10-425 screw vials. The 9mm screw vials can be used in any autosampler which used 11mm crimp top vials and 10-425 screw vials. Compared to 11mm crimp top type, the 9mm screw one can be much applied as hand removing convenient.

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

9mm 2ml Wide Opening Screw Vials. 9mm screw thread caps, septa, and vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear. type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Clear 2ml HPLC Vials and closures are universally suitable on most autosamplers. Due to their artificially reduced cap-height screw caps, N9 doesn’t have a standardized thread design.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Conical glass inserts have a tapered bottom with pulled tips and are available with or without plastics polypropylene springs. The spring acts as a shock absorber during needle penetration and raises the insert above the bottom of the vial, allowing greater sample recovery.

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersability of materials, allowing you an unhindered view of the solution.

The 2mL glass screw top autosampler vial has a variety of neckwear and opening diameters to choose from. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The large opening reduces the risk of the autosampler needle bending during sampling.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.

4 mL HPLC vials typically have the following specifications:

Capacity: 4 mL

Dimensions: Common dimensions include 15 mm diameter and varying heights (usually around 45 mm).

Neck Type: Most vials have a threaded neck (usually 13-425) to ensure a secure seal.

Material: Made of high-quality borosilicate glass, it has excellent chemical resistance and thermal stability.

Bottom Type: The flat bottom design ensures stability during handling and analysis.

These vials are typically sold in bulk packaging, with each box typically containing 100, making them convenient for lab use.

0.3 ml clear glass micro insert fixed in 2ml glass vial, designed for valuable samples to save for testing use volume

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

All 2ml HPLC Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren as a leading manufacturer in China, supplies high-quality chromatography consumables such as 2ml HPLC Vials with Cap and syringe filters.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

These 2ml clear chromatography vials include 100/PK of 2ml RSA-Pro™ surface-treated glass vials with 9mm screw threads. Any requirement about 2ml clear chromatography vials,please contact AIJIREN.
Volume: 2ml
Usage: Laboratory Analysis
Brand Name: AIJIREN
Printing with Company Logo: Accept

 1.5mL Clear Screw Neck vial,8-425 Thread,11.6*32mm application in liquid chromatography, Gas chromatography, and Mass spectrometry. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

1mm snap autosampler vial often used in conjunction with Shimadzu, Spectrophysics, Varian and other automatic samplers, the bottle is made of colorless type 1 A or amber type 1 B borosilicate glass It is completed with a writable label for sample identification.

Aijiren offers proven 2 mL Clear Screw Top Vials and consumables for the chromatographer. Meeting the requirements of customers’ demands.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Several factors need to be considered when choosing Storage Sample Vials- vials compatibility, sample volume, sample compatibility, neck design, vial glass material, and especially exposure to heat or freezing temperatures. Aijiren is the leading supplier of amber storage sample vials since 20007.

Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

11mm crimp top chromatography vial for sale is made of type I or borosilicate glass. This chromatography vial is better seal than screw top vial and snap top vial. Aijiren produce all the chromatography vials and septa in Class 100000 Cleanroom.
The 11mm crimp top autosampler vial 2ml is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use.At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren HPLC vial packaging is available in different packaging materials. Common packaging materials include acrylic, PET and PP.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Flat bottom glass inserts have the largest capacity and are the most economical inserts. These inserts are cylindrical in shape with a flat bottom.Aijiren is the leading supplier of Flat bottom glass inserts since 2007.

2ml Clear Screw HPLC Vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples.

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

There are screw top autosampler vial, snap Top HPLC vial and glass storage vial. All of those glass vial are often needed in laboratory. The glass vial can supply in Amber and Clear color. Borosilicate 3.3 Glass material made the Glass vial.

1.5ml Snap Top Vials ND11, wide opening hplc vial with matched PE Snap Top Seals ND11, PTFE/rubber septa & Micro-Insert.Vials with integrated Micro-Insert are available .Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling.
2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. 

zhejiang Aijiren Tech. is professional supplier of 8mm thread hplc vials, autosampler vials 1.5ml / 2ml, 8-425 trhread vial is the original screw thread vials, dimension: 12*32mm, meterial: borosilicate glass, clear or amber.

Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. The 250 μL Conical Bottom Vial Inserts are made of clear glass and suits for 9mm, 10mm, and 11mm vials.  Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial. The precise design and sealing properties of micro insert vials prevent sample loss, evaporation, and contamination, preserving the integrity of analytes throughout the analysis process. Whether in pharmaceutical research, environmental analysis, or other scientific disciplines, micro insert vials empower researchers to obtain precise and accurate results with limited sample availability.

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Glass Vials Lab 8-425 neck finish represents a hplc vials &gc vials the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm Autosampler Hplc Vials &gc vials are available in a variety of neck finishes and opening diameters.

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Micro inserts Packing: Economy Package and General Package for choose. Neutral carton outside, pallet is available to protect quality better.
OEM packing is also available.

Amber 2ml HPLC Vial are available in a variety of neck finishes and opening diameters. Amber 2ml HPLC Vial with Caps are available as individual components as well as convenience kits that include vials, caps and septa.

Autosampler vials for HPLC are generally grouped depending on the diameter of the vial, the height of the vial, and, the thread finish. Both clear glass and amber glass are highly inert.
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15

11mm crimp top vials have a volume of 0.3mL and provide an excellent seal for long term sample storage and analyses involving high volatile solvents. Standard vials for GC and HPLC applications.2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples.

Micro vials are specially designed to collect micro-volume samples and minimize evaporation.
Two sizes are available
Tapered for high recovery of contents.
Work with Mininert sampling valves.

Aijiren’s Snap Top Chromatography Vials are made of transparent or amber type 1 borosilicate glass (Grade A, 33 expanded borosilicate glass). The Snap Top Chromatography Vial can accept either aluminum snap-on seals or polyethylene snap-on caps. The colors are white, red, and blue. You can choose from them, which is very suitable for short-term storage.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling and also can be used for GC and HPLC. 4mL 13-425 Screw Thread Autosampler Vials are widely used in compound storage as well as for chromatography sample vials. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Available as closed or open top screw seals with 13-425 thread. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

Aijiren 9MM hplc vials offer the lowest ion content possible to reduce sample loss and contamination.
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

The 2ml HPLC Screw Vials are made from clear/ amber, Type I borosilicate and 33 expansion glass.2ml Amber HPLC Screw Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Reduce the chances of bent or broken needles during sampling.

Zhejiang Aijiren Technology, Inc. is a global supplier of life-science, chemistry, laboratory consumables, etc. Our major products are high performance liquid chromatography & gas chromatography consumables such as Chromatography Autosampler Vials with closures, inserts, crimper and syringe filters, etc; Water analysis consumables such as COD test tube.

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.