Closure & Septa for 8-425 (8mm) Screw HPLC Vials for Sale

All chromatography vials produced by Aijiren are made of boronic acid glass. Aijiren’s chromatography vials are always the main product. If you are interested, please contact online customer service.

These glass vials are used in the environmental industry. Available in Flat bottom.
Clear. Type 1, Borosilicate, 33 Expansion. Also available in Amber, 51 Expansion.
Various sizes and capacities are available. Caps are sold separately.
(24-414 finish available by special order).

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

The 2ml chromatography vial is forged at high temperatures from borosilicate glass. The Aijiren Scientific 2ml chromatography vial Certified Vial Convenience Kit (Opening 9mm) is fully lot tested in multiple ways for 15 critical parameters.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
1.Ideal for general laboratory use and sample storage.
2.Chemically inert caps suitable for most chromatography and storage applications
3.Top grade PTFE/silicone septa used for cleanliness

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Round bottom vials are designed for Perkin Elmer™, Tekmar™ and Varian™ units

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling and also can be used for GC and HPLC. 4mL 13-425 Screw Thread Autosampler Vials are widely used in compound storage as well as for chromatography sample vials. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Available as closed or open top screw seals with 13-425 thread. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

China 0.3ml PP Short Screw-Thread Micro-Vial, Clear 11.6*32mm.Aijiren 9mm screw thread vials have a volume of 0.3mL micro vials and make it easier to attach or remove the closure making sample prep more efficient.
Classification: Laboratory Bottle
Brand Name: WAJR, Aijiren
Model Number: VP91
Place of Origin: Zhejiang, China (Mainland)
Packaging: Shrink Packing And Then Carton
Certification: ISO9001
Sample: FREE SAMPLES
Type of Payment: T/T In Advance

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

These 20mm Crimp Top Aluminum Caps are typically made of aluminum, which is a lightweight and corrosion-resistant metal. Aluminum provides excellent sealing properties, ensuring the integrity of the sample within the vial. The cap features a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. 20mm Crimp Top Aluminum Caps often come in various colors, which can help with sample identification, organization, or differentiation of different products or solutions. The cap material is a metal aluminum cover. The design with a 9.5mm hole in the center of the cover can be used for headspace analysis. Standard GC and HPLC sample bottles can be used for autosampler and sample storage.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

Aijiren 2ml amber HPLC vials with blue caps are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
Product Name: 2ml Amber HPLC Vials with Blue Caps
Place of Origin: Zhejiang, China
Packing: 100pcs/pack
Color: Amber or Clear
Size: 12*32mm

Aijiren pp caps for 2ml 9-425 screw-top vials with caps lined with PTFE/Silicone septa are used in chromatography analysis, it can be used in HPLC/GC Application.
Size: 9mm
Cap Material: PP
Color: Blue or Customized
Application: For 2ml 9-425 Screw Top Vials
Matching Brands: Waters, Varian, Shimadzu etc

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

Item:2ml hplc vials and 4ml washing vials supplier
Color: Clear or Amber
Brand: Aijiren Tech
Capacity Recommend: 1.5ml Standard
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The SEPTA is made of PTFE silicon rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. Used for municipal wastewater testing; industrial wastewater and process control testing; and environmental water testing. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. The contents of the pipe should be disposed of in accordance with the requirements of local authorities.

Zhejiang Aijiren Technology, Inc. is a global supplier of life-science, chemistry, laboratory consumables, etc. Our major products are high performance liquid chromatography & gas chromatography consumables such as Chromatography Autosampler Vials with closures, inserts, crimper and syringe filters, etc; Water analysis consumables such as COD test tube.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. The manual crimper is suitable for standard laboratory bottles and seals with aluminum caps. Compared with the metal handle design, the ergonomic arc-shaped handle provides higher hand comfort during use. The bottom handle can be held steadily, without the need for “extra” squeezing. The easy-to-see adjustment knob is located on the head of the crimping pliers, so you can easily determine when the desired crimp setting is reached.

Headspace vials are designed to withstand high internal pressure, therefore all Aijiren brand headspace vials have a wall thickness of 1.2mm for added safety, thus it is assured that the vial will not burst. 
Capacity (mL): 20
Diameter (mm): 23
Height (mm): 75
Quantity: 100
Base Style: Round Bottom
Finish: Beveled Edge
Color: Clear
Marking Spot: NO

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

There are some lab autosampler vial, these glass autosampler vials are hot sale in recently. 4ml screw autosampler vial, 9mm screw glass sample vial and ND11 crimp HPLC vial are also seen in chromatography laboratory. Most important, All of autosampler vial can be supplied in wholesale price. 1.5ml–4ml autosampler vial for chromatography analysis are in stock. welcome to inquiry.

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

Here we describe a case where the type of Hplc Vials And Caps used results in an interesting phosphorous pseudorotation driven by the mild alkalinity of glass.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

The butyl rubber stopper is an off-white rubber-like solid with a density of 0.92g/cm3. It is odorless, insoluble in water, and soluble in hexane and chloroform. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption and other characteristics.

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

11mm crimp top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

These standard opening 2ml HPLC Vials with Caps have a narrow opening that can be used with a 9-425mm cap and a septum.So if you are interested in 2ml 9mm HPLC Vial, please contact us right NOW.

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

These 2ml HPLC Vials with Caps are 40% large and are designed for use in robot autosamplers, known as Agilent. So welcome your inquiry about 2ml HPLC Vials with Caps and other chromatography vials from Aijiren.

9mm Chromatography and HPLC Autosampler Vials and closures listed in this section are designed, engineered, and manufactured for optimum performance with HPLC and LC/MS applications.
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.

All chromatography vials produced by Aijiren are made of boronic acid glass. Aijiren’s chromatography vials are always the main product. If you are interested, please contact online customer service.

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

The main application for HPLC, autosampler, chromatography, Agilent, waters machine. All autosamplers of Ajiren Tech are 100% integrity tested and manufactured according to ISO 9001 standard. If a 2ml screw HPLC vialsis required. Please contact Ajiren.

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Vial Material: First grade hydrolyzed glass, Borosilicate glass

2ml Clear HPLC Vial with Cap is most often used in the diagnostic, analytical, or pharmaceuticals markets, but we’re seeing an increasing frequency of use in the Personal Care and Cosmetics for sampling and trial sizes.

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren 20mm Crimp Top Aluminum Caps are designed for secure sealing with beveled tops and are available with various septa options, compatible with both clear and amber vials, and suitable for use in gas chromatography applications.

Aijiren Thread Caps with Septa products are designed for 9mm short thread vials. They are made of PP and are available in a variety of colors and septa materials (PTFE/silicone). They are suitable for chromatographic analysis such as HPLC and GC to ensure the sealing and purity of the sample.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

The cap material is a metal aluminum cover.Standard GC and HPLC sample bottles can be used for autosampler and sample storage. There are two designs round bottom and flat bottom.The crimp cover of the vials is made of aluminum for crimping and sealing; plastic (polyethylene, polypropylene, or phenolic resin) for non-crimping and sealing.

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

Aijiren HPLC, GC, and autosampler vial and 9mm blue screw caps products are manufactured to provide high-quality, state-of-the-art solutions for your most challenging, sensitive applications.
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

8-425 polypropylene screw finished cap with PTFE and silicone septa for chromatography autosampler vial, this screw cap can supply solid and hollow. Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Screw cap are available in 8-425 screw cap, 9mm screw cap, 10-425 cap, 13-425 cap and 24-400 cap.

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

Product Size: Pack of 100
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Amber 2ml HPLC Vial are available in a variety of neck finishes and opening diameters. Amber 2ml HPLC Vial with Caps are available as individual components as well as convenience kits that include vials, caps and septa.