laboratory chromatography consumable supplier

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment. Syringe filters can be used in HPLC analysis and IC analysis to filter sample solutions, which is an important step in the sample pretreatment process.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

20ml crimp top gc headspace vials suitable for headspace analysis of volatile solids and gases. Aijiren Tech crimps top headspace vials are available in a flat or round bottom style, with clear or amber glass.

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension. This tension in the cap to return to its original size is the force forming the seal between glass, cap and septum. The advantage of a plastic snap cap is no tools are required to assemble. The snap-top cap is a compromise sealing system.

Material: Borosilicate Glass
GL45 threaded cap with a drip-free pouring ring
Borosilicate glass content: B2O3 about 12%-13% ; SiO2 over 80%
1. good thermal resistance
2. excellent chemical durability
3. high light transmission
4. high-quality pristine surface

Item No: Aijiren hplc filter vials for sale
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass. Capacity ranges from 20 to 40mL. Provide constant pH for duration of sample storage life. Chemically inert caps suitable for most chromatography and storage applications. Top grade PTFE/silicone septa used for cleanliness

Clear 20 mL gas chromatography vials with 20 mm crimp seals, designed to fit most headspace autosamplers. Designed to use separating organic and inorganic compounds for analysis, chromatography vials come in different finishes to guarantee chemical compatibility.

11mm Snap Top Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Aijiren 10mm hplc vial: dimensions: 11.6mm x 32mm, mouth diameter: 10mm, 425 standard threads, 2ml capacity.
Features of the related parameters of the cover cushion: septum diameter 10mm, thickness 1.5mm; cover opening diameter 7mm; cover applicable diameter 10mm, GPI standard 425 thread.

All headspace vials are manufactured to provide uniform glass thickness which ensures even heat distribution for consistent sampling reliability.
Vial Height: 75mm
Vial Material: Glass
Label: No
Bottom Shape: Round
Vial Width: 22.5mm
Availability: In Stock

10-425 Screw Neck 2ml HPLC Autosampler Vial design is characterized by universal ease of use, especially the use of automated sample introduction systems. Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Aijiren 500ml media bottle borosilicate glass 3.3, clear, with PP screw cap. Having exceptional versatility in usage, the glass bottles have strong resistance to successfully contain any solid, liquid, or powdered specimens and samples.

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) 1.5ml vials and 13-425 (13mm) 4ml vials.

Autoclavable: Max 120℃ for bottles, 140℃ for caps when autoclaving, durable, reusable, environmentally friendly
Shape: ‎Round
Material: Glass
Manufacturer: Aijiren
Available Volume :50ml to 1000ml
Using for storage as well as mixing and sampling
These heavy-duty borosilicate glass round bottles

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Suitable for 9mm Short Thread Vials. Caps is made of polypropylene. Septa is made of PTFE / Silicone. Color can be customized. 6mm Centre Hole or Closed Top can be selected.

15x45mm 4mL vials are widely used in compound storage as well as for chromatography sample vials.4mL vials are compatible with 13-425 screw thread closures，is for cleaning the needles during automatic sampling.13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler.4mL vials are widely used in compound storage as well as for chromatography sample vials.

Autoclavable: Max 120℃ for bottles
140℃ for caps when autoclaving
durable, reusable, environmentally friendly
Glass bottles are fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

9mm screw high recovery sample vial is made of borosilicate class, so it has good Liner coefficient. In chromatography analysis field, 9mm high recovery screw vials is widely used in Life science and technology, Environmental Protection, Food safety. 
1.5ml glass high Recovery Vials Reduce Residual Product Waste by 99%Aijiren offer innovative high-recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples.

With the Aijiren COD tube test, each user can easily perform highly sensitive and accurate water detection. The time required for the measurement process is greatly shortened, especially for standard analysis and series measurement, while greatly reducing the workload. The COD test tube contains a precise dose of reagent. Therefore, excessive chemical stocks are avoided and work safety is improved.

There are many differences between butyl and natural rubber. The main advantage is that butyl rubber has better chemical stability and aging resistance than natural rubber. It has the elasticity of natural rubber and does not contain protein ingredients, but it does not have butyl. Chemical inertness and aging resistance

zhejiang Aijiren Tech. is professional supplier of 8mm thread hplc vials, autosampler vials 1.5ml / 2ml, 8-425 trhread vial is the original screw thread vials, dimension: 12*32mm, meterial: borosilicate glass, clear or amber.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

The filter construction facilitates exceptional loading capacity with fast flow rates. This prevents the build-up of back pressure typically caused by the blocking of an unprotected membrane.
Membrane material: Nylon
Housing: Polypropylene(PP) housing
Connectors: Inlet: Female Luer
Outlet: male slip Luer
Maximum Operating Temperature:60 ℃
Pack: 100 units/pack

Aijiren’s 2ml 8mm Screw Top HPLC Vial uses borosilicate hydrochloric acid glass, which can withstand high temperature, is highly inert, and is not easy to react with chemical reagents. Customers can choose 5.0 type or 7.0 type glass according to their own experimental conditions, or they can choose to bring or not label area.

The choice of autosampler vials may seem much less important compared to the significance chromatography instruments many laboratories use. However, the wrong choices of HPLC or GC vials, caps, septas and inserts might well lead to lower experiment productivity and reproducibility or even mechanical damage to the autosampler.

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Packing: 6pcs per pack, 4PK/carton.63.5*43.5*26.5cm. 15KG. packed in PP-Trays with plastic film and cover plate,neutral cartons outside OEM packing can be also provided. Permanent white enamel graduations markings. For general purpose laboratory applica

The 20mm Crimp Headspace Vial produced by Aijiren has three specifications: 6ml, 10ml and 20ml. The 6ml via is 22*38mm, flat bottom, and made of 5.0type glass. A 10ml via is 22.5mm*46mm, and a 20ml via is 22.8*75mm. There are two types of bottoms, round bottom and flat bottom. There are two types of glass, 5.0type and 7.0type, and two colors: clear and amber.

10ml headspace vial with aluminum crimp cap and Magnetic bimetal cover is designed for Gas Chromatography.
this 10ml GC vial is Flat bottom, which size is 22.5x46mm. As you saw in the pic, there are two different cap and septa to selection. Aluminum cap and Magnetic bimetal cover. Please choose the 10ml glass GC vial as your gas chromatography instrument requirement.

1mm snap autosampler vial often used in conjunction with Shimadzu, Spectrophysics, Varian and other automatic samplers, the bottle is made of colorless type 1 A or amber type 1 B borosilicate glass It is completed with a writable label for sample identification.

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass, with GL45 thread cap.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument.

The B2O3 content for borosilicate glass is typically 12–13% and the SiO2 content is over 80%. High chemical durability and low thermal expansion (3.3 × 10−6 K−1) – the lowest of all commercial glasses for large-scale technical applications – make this a multitalented glass material.
1. good thermal resistance
2. excellent chemical durability
3. high light transmission
4. high-quality pristine surface

30mm diameter syringe filter:
Filtration area: 4.9cm2
Housing material: polypropylene
Holdup volume: <100 µl Sample volume: <120 ml Max. housing pressure: 8 bar Maximum Operating Temperature: 80°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on membrane)

There are a lot of factors to consider when selecting a chromatography vial. Aijiren Tech offers a large selection of 0mm 10-425 HPLC vials and closures, including HPLC vials, inserts, caps, and septa to suit your analytical needs.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Material: Borosilicate Glass/Glass Type 1

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass, with GL45 thread cap, pouring ring and PP screw cap autoclavable to 140°C. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions. Excellent chemical resistance. Minimal thermal expansion. Clear bottles are ideal for displaying items, Sizes range from 100 ml up to 1000 ml and the larger ones may be used to store preserved biological specimens in the lab. The large ones also make excellent terrariums or miniature aquariums. permanent white enamel graduation markings. Large area for bottle marking/identification. Transparent contents and volume can be quickly checked. Reusable and breakage resistant. Suitable for general-purpose laboratory applications, such as storage, sample preparation, transport, autoclaving media.

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass, with GL45 thread cap. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions. Clear bottles are ideal for displaying items, Sizes range from 100 ml up to 1000 ml and the larger ones may be used to store preserved biological specimens in the lab. The large ones also make excellent terrariums or miniature aquariums.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

liquid chromatography is one kind of experiment way. The 9mm screw autosampler vial is compatible with Agilent, Shimadzu, Waters, Thermo Fisher and other instrument. In your experiment, No matter what questions was happened, you can tell our techincal engineer. They will give you solutions. Welcome to inquiry.

Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro-inserts are manufactured of clear glass. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.
Micro inserts can be used with screw tops, crimp tops, or snap-top vials. All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed and uniform tip that enables better sample recovery. Micro-inserts can be used on all 1.5ml vials. Effectively relieves the pressure of the syringe. PolySpring inserts are self-aligning.

The Hand Decrimper is typically designed to work with two common crimp cap sizes, which are 11mm and 20mm. These sizes correspond to the diameter of the crimp caps, indicating their compatibility with specific vial sizes. This tool is typically made of durable materials such as stainless steel or high-quality aluminum. These materials are chosen for their strength and resistance to corrosion, ensuring long-lasting performance. The decrimping features a handle, often designed with ergonomic considerations for comfortable and efficient use by laboratory personnel. The handle provides a firm grip for precise control during the decrimping process.

In HPLC analysis, the particle size of the column packing is small and is easily blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Different pore sizes filter pollutants of different sizes. Individually packaged, 100pcs per pack, 40PK/carton.56*50*26cm.12.5KG.packed in PP-Trays with plastic film and cover plate, neutral cartons outside OEM packing can be also provided.

The 500ml Reagent Bottle produced by Aijiren is often used in HPLC chromatographic analysis. The 500ml reagent bottle is often used to hold reagents in chromatographic analysis. The liquid level of the reagent in the bottle can also be clearly seen through the transparent glass to facilitate Laboratory personnel add liquid in time

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

The screw neck headspace sample bottle produced by Aijiren has an optional capacity of 10ml and 20ml, and the specifications are: 22.5 * 46mm, 22.5 * 75.5mm. The 20ml GC analysis headspace sample bottle series strictly control the glass density of the bottle mouth to improve the sealing performance and prevent breakage. The precise molding bottleneck improves the processing capacity of the autosampler.

Item: 250ul HPLC Vial Insert
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

Short Thread Bonded Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; Adhesive-free bonding process, without the introduction of adhesive, the septum retains the excellent resilience performance of silicone rubber or silicone, softer than the septum of the adhesive process, which can provide better needles for the autosampler. protection of. Strict production management ensures product quality. The Bonded Caps with Septa are clean and ready to use without cleaning.

The Reagent Bottle 500ml has a ceramic scale, which is not easy to fall off and is not easy to fade and blur. So if there have any requirement about Reagent Bottle 500ml, please contact Aijiren Tech.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

100ml Amber Glass Reagent Bottle with GL45 Screw Cap (Royal Blue) is made of Super Thick Borosilicate Glass for Durability Graduated 100ml bottle.Aijiren is the leading supplier of 100ml Amber Glass Reagent Bottle since 2007, is a reliable supplier of lab consumables.

They are standard vials for GC/HPLC and designed to work in a variety of Autosamplers requiring narrow neck vials. The vials are preferentially used on instruments of the following manufacturers: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR (Merck®)/Hitachi, etc.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

500ml media bottle with Screw Cap offered are mechanically strong, chemically resistant, and are provided with plastic Pouring rings for drip-free operation.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

The most common sample containers range in size from 100ml Amber Reagent Bottle to 1000 ml.Aijiren is the leading supplier of 100ml Amber Reagent Bottle since 2007, is a reliable supplier of lab consumables.

The Via with Cap produced by Aijiren is often used in chromatography. Aijiren has its own factory and workshop, with more than 120 workers working in the factory. Aijiren purchased a lot of the latest equipment to form a production line. Both Aluminum Caps and Screw Caps are used to seal Vias and used in chromatography experiments.

The vial for HPLC with insert is larger than the 9mm screw sample vial and has a wider mouth.2ml autosampler vials is a container designed to temporarily hold samples analyzed as part of gas (GC) or liquid (HPLC) chromatography.

Aijiren supply 1000ml Amber Glass Reagent Bottle and clear Glass Reagent Bottle. All of the reagent bottles are glass material. Aijiren is the leading supplier of 1000ml Amber Glass Reagent Bottle since 2007, is a reliable supplier of lab consumables.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

There is a requirement for a 2ml screw cap glass vial. Contact us now! In addition, the 2 ml amber screw top bottle is made of 33 inflatable glass and can be heated at high temperatures during transparent glass (1,200 °C) during the manufacturing process.

GL45 threaded cap with a drip-free pouring ring
Max temperature of 140 degrees Celsius (284 degrees Fahrenheit)
borosilicate glass content: B2O3 about 12%-13% ; SiO2 over 80%