Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. 13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler. 4mL vials are widely used in compound storage as well as for chromatography sample vials. Aijiren 13-425 screw neck vial is generally made of high-quality Borosilicate Glass or 1st hydrolytic class glass. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, and suitable for most chromatographic applications and includes a write-in patch for sample identification. Available with graduated marking spots.

Vial Material: First grade hydrolyzed glass, Borosilicate glass

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear or Amber borosilicate glass. Available with a standard graduated write-on patch for easy filling and identification of samples. Requires the use of 8-425 closures and 8mm septa.2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Strictly quality control to ensure the consistent size of each lot of 8mm Screw Vials. 

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

Magnetic Screw caps for CTC are novelties in the crimped neck-dominated Headspace market. However, especially for the hard-to-crimp magnetic caps, screw closures are a convenient alternative. It is constructed from metal, which ensures durability, strength, and resistance to environmental factors, making it suitable for long-lasting applications. The cap is equipped with a magnetic feature. This is extremely useful in precision work where screws need to be secured and placed accurately.

EPA vials are those that meet the requirements of the US Environmental Protection Agency (EPA) for the testing of potentially harmful environmental contaminants in water or soil samples.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

15-425 black screw pp cap has a 15mm outer diameter, which means it is compatible with vials that have a corresponding neck size and threading. These caps are typically made from high-quality materials such as polypropylene. These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost-effectiveness, and pliability.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren 15-425 threaded caps with silicone septa are designed for HPLC autosampler bottles to ensure the stability and integrity of samples during storage and injection. These caps are made of polypropylene (PP) material, which has excellent chemical stability and sealing performance and is suitable for a variety of laboratory environments.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High Recovery Vials Reduce Residual Product Waste by 99%.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Storage vials also named sample vials, used in the package of biological agent, cosmetics, high value chemistry and so on.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.
Aijiren offers many standard vials and vial kits for volatiles sampling, compound storage and other non-chromatography applications.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.

Magnetic Screw caps for CTC are novelties in the crimped neck-dominated Headspace market. However, especially for the hard-to-crimp magnetic caps, screw closures are a convenient alternative. It is constructed from metal, which ensures durability, strength, and resistance to environmental factors, making it suitable for long-lasting applications. The cap is equipped with a magnetic feature. This is extremely useful in precision work where screws need to be secured and placed accurately.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear or Amber borosilicate glass. Available with a standard graduated write-on patch for easy filling and identification of samples. Requires the use of 8-425 closures and 8mm septa.2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Strictly quality control to ensure the consistent size of each lot of 8mm Screw Vials. 

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. 13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler. 4mL vials are widely used in compound storage as well as for chromatography sample vials. Aijiren 13-425 screw neck vial is generally made of high-quality Borosilicate Glass or 1st hydrolytic class glass. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, and suitable for most chromatographic applications and includes a write-in patch for sample identification. Available with graduated marking spots.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Aijiren Screw Caps with Septa for 8-425 Screw Neck Vial is a screw cap designed for 8-425 screw neck vials with PTFE or silicone septums for high performance liquid chromatography (HPLC) and gas chromatography (GC) sample vials. These caps ensure a good seal and chemical compatibility, while offering a wide selection of sizes and materials to meet different laboratory needs and autosampler compatibility requirements.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The gasket is made of a PTFE silicon rubber gasket, which has strong sealing performance and can resist various chemical corrosion. The  COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate.

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

EPA vials are those that meet the requirements of the US Environmental Protection Agency (EPA) for the testing of potentially harmful environmental contaminants in water or soil samples.

9mm 2ml Short Tread Glass HPLC Autosampler Vials have two different materials, one is borosilicate glass, and the other is imported first-grade hydrolytic glass, which can meet the different needs of customers; The 2mL Amber Screw Top Autosampler Vials are made from high-quality amber glass, providing excellent protection against light and UV radiation. The amber color helps to preserve the integrity of light-sensitive samples during storage or analysis. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass.  The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius.  It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The COD Test Tube is small in size and light in weight. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. 

10-425 Screw Neck 2ml HPLC Autosampler Vial design is characterized by universal ease of use, especially the use of automated sample introduction systems. Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

Short Thread Bonded Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; Adhesive-free bonding process, without the introduction of adhesive, the septum retains the excellent resilience performance of silicone rubber or silicone, softer than the septum of the adhesive process, which can provide better needles for the autosampler. protection of. Strict production management ensures product quality. The Bonded Caps with Septa are clean and ready to use without cleaning.

Aijiren autosampler vials cover a wide range of applications, from microsampling to headspace analysis. 4ml 13-425 Screw Thread Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration. When paired with Aijiren’s cap& septa, our screw or crimp caps securely seals your samples and helps prevent sample loss from evaporation. 13-425 Screw Thread Vials are manufactured from Type 1 borosilicate glass, available in clear or amber, or from Polypropylene. Excellent for long-term storage.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The SEPTA is made of PTFE silicon rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. Used for municipal wastewater testing; industrial wastewater and process control testing; and environmental water testing. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. The contents of the pipe should be disposed of in accordance with the requirements of local authorities.

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High Recovery Vials Reduce Residual Product Waste by 99%.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

There are glass vials and plastic vials to choose from, and different materials can be selected for different scenes.

Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Aijiren offers pre-cleaned 40 ml glass vials certified for Total Organic Carbon (TOC vials).  We offer TOC vials certified to contain less than 10 Parts Per Billion (PPB) and less than 20 Parts Per Billion (PPB) for use in pharmaceutical and biotechnology applications. Sample storage vials, also known as chemical glass storage bottles, or sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils, and other products, suitable for long-term storage and transportation of products, Has excellent sealing performance. 

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling and also can be used for GC and HPLC. 4mL 13-425 Screw Thread Autosampler Vials are widely used in compound storage as well as for chromatography sample vials. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Available as closed or open top screw seals with 13-425 thread. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC und HPLC.

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

15-425 black screw pp cap has a 15mm outer diameter, which means it is compatible with vials that have a corresponding neck size and threading. These caps are typically made from high-quality materials such as polypropylene. These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost-effectiveness, and pliability.

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

The 9mm HPLC Autosampler Vial is the most widely used. Support OEM customization, customized logo, customized packaging

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

Suitable for 9mm Short Thread Vials. Caps is made of polypropylene. Septa is made of PTFE / Silicone. Color can be customized. 6mm Centre Hole or Closed Top can be selected.

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.