Wholesale 2ml HPLC Autosampler Vial for Screw Neck

Aijiren’s 2ml Screw Vial is often used to hold samples into the autosampler for testing. The samples are often chemical reagents. If impurities appear in the chemical reagents, the test results will be affected. Therefore, we will use the Syringe Filter to filter, and inject the filtered reagents into 2ml Screw Vial, and then put it into the Autosampler for testing.

Aijiren 10mm hplc vial features: all glass is made of material with 5.0 light transmittance, which is perfectly compatible with the instrument. 10-425 wide-mouth vial is similar to 8-425 small-neck vial, mainly used for Waters autosamplers and Japanese instruments , And the wide mouth can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

The 9mm HPLC Autosampler Vial is the most widely used. Support OEM customization, customized logo, customized packaging

2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

250µL Flat Bottom Glass Inserts for Chromatography Vials. These Flat Bottom Glass Inserts are designed to be used in 2mL standard opening crimp top and screw thread vials. They represent an economical alternative to the conical limited-volume inserts. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. The 250µL Glass Flat Bottom Inserts make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must-have for your research.

The 2mL glass screw top autosampler vial has a variety of neckwear and opening diameters to choose from. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The large opening reduces the risk of the autosampler needle bending during sampling.

There are a lot of factors to consider when selecting a chromatography vial. Aijiren Tech offers a large selection of 0mm 10-425 HPLC vials and closures, including HPLC vials, inserts, caps, and septa to suit your analytical needs.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Material: Borosilicate Glass/Glass Type 1

11mm crimp top vials have a volume of 0.3mL and provide an excellent seal for long term sample storage and analyses involving high volatile solvents. Standard vials for GC and HPLC applications.2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension. This tension in the cap to return to its original size is the force forming the seal between glass, cap and septum. The advantage of a plastic snap cap is no tools are required to assemble. The snap-top cap is a compromise sealing system.

The snap-on vial produced by Aijiren uses more glass in the neck of the bottle, so it is not easy to break when opening. The snap-on seal neck is compatible with crimping and/or snap-on seals, and the cover can be removed without any special tools. It is recommended to use these vials for short-term sample storage and non-volatile samples, as their tightness is not as good as crimping or thread sealing.

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

1.Micro-volume “Drop-In” Inserts for use with Standard 9-425 (9mm) Mouth HPLC Vials.
2.Compatible with all 2ml Screw HPLC Vials, 9mm Thread
3.Center automatically with a flat bottom and mandrel interior
4.Type I borosilicate glass

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.
High quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base insert vial can saving samples while during injection. wide opening top for better needle injection. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volum. Bottom fixed micro insert to keep the vial central vertical

Aijiren 9mm 2ml Short Tread HPLC Autosampler Vial is designed for high-performance liquid chromatography, featuring a compact 9mm neck diameter for efficient autosampler compatibility and a shorter thread design for quick, reliable sealing. Crafted from premium borosilicate glass, these vials ensure chemical resistance and clarity, making them an ideal choice for precise sample analysis in the lab.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
1.Ideal for general laboratory use and sample storage.
2.Chemically inert caps suitable for most chromatography and storage applications
3.Top grade PTFE/silicone septa used for cleanliness

Aijiren 11mm Snap Ring 2ml Autosampler Vial is made of high-quality materials to ensure the stability and safety of samples during analysis. Its unique Snap Ring design provides excellent sealing performance to prevent sample volatilization and contamination, and is suitable for various autosamplers to improve experimental efficiency and reliability of results.

The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle.
If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release of the vacuum that forms when a large volume of sample is withdrawn from a vial.

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

Aijiren autosampler vials are suitable for HPLC, LC/MS, GC, and GC/MS instruments and applications.

Several factors need to be considered when choosing Storage Sample Vials- vials compatibility, sample volume, sample compatibility, neck design, vial glass material, and especially exposure to heat or freezing temperatures. Aijiren is the leading supplier of amber storage sample vials since 20007.

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

15x45mm 4mL vials are widely used in compound storage as well as for chromatography sample vials.
4mL vials are compatible with 3-425 screw thread closures.
PTFE/Silicone septa are most popular for HPLC application, and Pre-slit septa are easier to pierce with needles.
Pre-assembled caps and septa are convenient and minimize contamination from handling.

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Item: 250ul HPLC Vial Insert
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

In chromatography analysis field, 8mm short screw vials is widely used in Life science and technology, Environmental Protection, Food safety. 2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm.

Autosampler vials for HPLC are generally grouped depending on the diameter of the vial, the height of the vial, and, the thread finish. Both clear glass and amber glass are highly inert.
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15

18mm Magnetic Screw Cap, Magnetic with Pre-fitted Silicone/PTFE Liner fit for 20ml headspace vials.
Manufacturer: Aijiren Tech
Transport Package: Pack
Production Capacity: 50000PCS/Day
Specification: 100pcs/pack

The 9mm HPLC Autosampler Vial is the most widely used. Support OEM customization, customized logo, customized packaging

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

HPLC Vials 10-425 1.5ml Screw Vials. Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling. Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass . Requires the use of 10-425 screw thread closures and 10mm septa.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

Aijiren screw thread top 8-425 sample vials design is characterized by the use of automated sample introduction systems, also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. Standard vials are widely used for GC and HPLC.

Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials. They fulfill all requirements with regard to tightness and analytical purity for GC as well as for HPLC. Due to the relatively thin septa penetration is safe and easy.

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

The choice of autosampler vials may seem much less important compared to the significance chromatography instruments many laboratories use. However, the wrong choices of HPLC or GC vials, caps, septas and inserts might well lead to lower experiment productivity and reproducibility or even mechanical damage to the autosampler.

These 4ml amber screw top vials are manufactured from superior 51A amber (Type 1, Class AB) or clear glass and feature a 13-425 thread finish. Available in Thermo Scientific™ National™ and Chromacol™ brands.

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Aijiren 9MM hplc vials offer the lowest ion content possible to reduce sample loss and contamination.
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren’s 2ml Screw Vial is often used to hold samples into the autosampler for testing. The samples are often chemical reagents. If impurities appear in the chemical reagents, the test results will be affected. Therefore, we will use the Syringe Filter to filter, and inject the filtered reagents into 2ml Screw Vial, and then put it into the Autosampler for testing.

HPLC / GC autosampler vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. All components of 2ml autosampler vials from AirekaCells® are designed manufactured by the same level of product standard.

11mm Crimp Top 2ml Autosampler Vial is an autosampler vial designed for HPLC and GC, with a capacity of 2ml and an 11mm crimp cap design for quick sealing. Made of borosilicate glass, it is available in transparent or amber options to protect samples from light and ensure accuracy and repeatability of analysis.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren autosampler vials cover a wide range of applications, from microsampling to headspace analysis. 4ml 13-425 Screw Thread Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration. When paired with Aijiren’s cap& septa, our screw or crimp caps securely seals your samples and helps prevent sample loss from evaporation. 13-425 Screw Thread Vials are manufactured from Type 1 borosilicate glass, available in clear or amber, or from Polypropylene. Excellent for long-term storage.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

8-425 screw top, 2ml Amber vial, graduated with writing area, standard opening vial
Caps are black screw PP cap,with 5.5mm centre Hole
Septum is made of High quality PTFE/silicone to ensure proper functioning

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

1.5ml Glass High Recovery Vial,12 dia x 32 mm H, Clear or Amber, Solid Glass, Large Opening Style, High Recovery, 9 mm Neck Finish, One Piece Conical Design Allowing Complete Sample Recovery
High Recovery Vial to minimize adsorption of polar compounds, including amino acids, proteins, and phenols to the inner surface of the vial. High-recovery vials deliver high sample capacity with very low residual volume. Use total-recovery vials for maximum sample recovery. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, JPN Pharmacopia

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Conical glass inserts have a tapered bottom with pulled tips and are available with or without plastics polypropylene springs. The spring acts as a shock absorber during needle penetration and raises the insert above the bottom of the vial, allowing greater sample recovery.

Aijiren 0.3ml 11mm Glass Crimp Vial with Fused Insert is a high quality glass micro vial designed for HPLC/GC analysis with a 0.3ml capacity, featuring an 11mm crimp neck and a 6mm diameter fused insert with a fixed bottom to maintain vertical centering, suitable for precious sample preservation and testing. Available in clear or amber coloured borosilicate glass, unscaled and compatible with a wide range of autosamplers.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Aijiren 300ul micro-volume inserts, clear glass, flat bottom. better to use combined with 2ml HPLC vials for HPLC.  Flat base Sample Vials.
Made from advanced technology and excellent raw materials. Precise bottle neck size, ensure autosampler handle is correct. Fully compatible with various brands of automatic samplers. Strict quality control to ensure size consistency from batch to batch. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal.

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

This type of glass has a borosilicate structure. It is ideal for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling
13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler
4mL vials are widely used in compound storage as well as for chromatography sample vials

The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle.
If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release of the vacuum that forms when a large volume of sample is withdrawn from a vial.

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

The opening of the 8mm hplc vial is 5.5 mm. These vials are designed for most autosamplers that use 12mm x 32mm crimp vials. They provide the convenience of threaded vials for instruments that were originally designed to crimp top vials. They are available in clear glass and amber glass8-425 screw top 2ml vials

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

11mm crimp top chromatography vial for sale is made of type I or borosilicate glass. This chromatography vial is better seal than screw top vial and snap top vial. Aijiren produce all the chromatography vials and septa in Class 100000 Cleanroom.
The 11mm crimp top autosampler vial 2ml is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use.At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

These headspace vials are made of superior quality 1st hydrolytic class glass (Type 1) and have a thicker glass wall to withstand higher temperatures and internal pressures for the analysis of volatile gas in the vial’s headspace.
Finish: Crimp Top with Bevel Finish
Pack Size:100
Colour: Clear
Type: Vial
Closure: Crimp
Closure Size: 20mm
Vial Height: 75mm

liquid chromatography is one kind of experiment way. The 9mm screw autosampler vial is compatible with Agilent, Shimadzu, Waters, Thermo Fisher and other instrument. In your experiment, No matter what questions was happened, you can tell our techincal engineer. They will give you solutions. Welcome to inquiry.

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

1. Chromatography vials, the wide opening crimp cap provides a larger target area for improved autosampler needle accuracy.
2. Crimp Vials with intergrated Micro-insert are also available in clear and amber glass.
3. Kinds septa: PTFE/Silicone, PTFE/ Silicone/PTFE Septa, single slit-septa to choose.

The 2mL glass screw top autosampler vial has a variety of neckwear and opening diameters to choose from. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The large opening reduces the risk of the autosampler needle bending during sampling.